Vital Signs Monitor - MD2000A1

Products Features :

• Large screen: SpO2,PR are shown on LED screen, pleth waveform on 3.5″ LCD screen in real time
• 72-hour data storage, 99-item patient ID
• 3-level Visual & Audio alarm; battery-low indication
• Intellectual control of power consumption, internal rechargeable battery lasts 24 hours or AC power
• Anti-high-frequency electrosurgical equipment
• Suitable for adult, pediatric and neonatal
• Widely used in small clinic, all departments in hospital, ambulance
• USB Data upload
• Built-in thermal recorder(optional)
• Compatible with CHOICE CMS（optional）

Technical Specifications Pulse oximeter :

Classification: Protection Class:Type BF defibrillation proof, Protection against moisture:IPX1

Alarm: SpO2, PR, Sensor out, Low voltage, Modes: Visible & 3-level audible alarms, Error code, Range Parameter SpO2 PR,  Upper alarm range 71% - 100% 31 - 350bpm, Low alarm range 70% - 99% 30 - 349bpm

Patient Range: Adult, Pediatrics and Infant

Appearance: Dimension: 296mm(11.65”) * 166mm(6.54”) * 96mm(3.78”), Weight: 550g (1.1lb)excluding batteries

Display: Type: 3.5” LCD & LED screen, Parameters: SpO2, PR, pulse bar, plethysmograph

SpO2: Measurement range: 70%-100%, Accuracy: 80%-100%: ±2%,70%-79%: ±3%

Environmental: Power: AC100-230V, 50/60Hz(±3Hz), Operation Temperature: 5℃ - 40℃(41-104℉), Storage Temperature:-20℃ - 55℃(-4-131℉), Operation Humidity: ≤80%, Storage Humidity: 0 - 93%

Pulse Rate: Measurement range: 30-235bpm, Resolution: 1bpm, Accuracy: 30-100: ±2bpm, 101-235: ±2%

Data transmission: USB, Flash disk, Wired LAN to choice central monitoring system

Standard Configuration: SpO2, PR, USB data transmission

Printer: Type built-in thermal recorder width of printing paper 48mm

Optional Configuration: Choice Central Monitoring System,Thermal recorder, Car Inverter