Resmed AirCurve 10 VAuto BIPAP Tripack With Humidifier
Do you want to purchase this product in bulk quantity? Fill the form and our team will send you the best offer.
The AirCurve 10 VAuto is an auto-adjusting bilevel machine that uses the comfort of both the AutoSet algorithm and Easy-Breathe waveform in its VAuto algorithm to treat obstructive sleep apnea patients who can benefit from greater pressure support.
The AirCurve 10 VAuto adjusts the baseline pressure to hold the airway open while maintaining fixed pressure support.
Brand | Resmed |
Model | Aircurve10 Vauto |
Operating Mode | CPAP, S,Vauto |
IPAP Range | 4-25cm H2O |
EPAP Range | 4-25cm H2O |
Auto on/off | Yes |
Ti Min | 0.1s – Ti Max |
Ti Max | 0.3s – 3.0s |
Ramp Time | 5-45min |
Ramp P | 4cm H2O |
Data Storage | Optional |
Humidifier | 1-5 Adjustment |
Easy-Breathe technology
The Easy-Breathe pressure waveform mimics the wave shape of normal breathing and replicates it for your breathing comfort.
Climate Control
With the new optional integrated humidifier, HumidAir, you can enjoy the benefits of humidification in one easy-to-use system. And when used with the ClimateLineAir heated tube, your device has been designed to automatically deliver the optimal temperature and humidity, for the ultimate comfort experience.
Other features
- Continuous leak management enables reliable delivery of therapy pressure while maintaining patient-device synchrony.
- Compatible with up to 15 L/min of supplemental oxygen in S and CPAP mode and 4 L/min in VAuto mode.
- The built-in ambient light sensor adjusts to the brightness of the room. So if you need to get up during the night, the screen’s back light won’t disrupt your bed partner. The light also turns off automatically, so you can settle back to sleep without disturbance.
Accessories :-
- Resmed Bi pap AirCurve 10V Auto machine
- Humidifier
- Climate Line tubing
- Power supply cable
- Power Adaptor
- Filter
- Travel bag
- SD card Optional
- 3 Years ,
- From manufacturer
Pressure relief is a feature that lowers your therapy pressure to help with difficulties breathing against the machine's airflow, providing a more comfortable and natural breathing pattern assistance can occur on the Exhalation, on the inhalation and on both exhalation and inhalation at the same time.
A CPAP/Bipap Machine delivers an airflow at a prescribed pressure at generally 4 cm to 30 cm H2o. APAP operates between a range and BiPAP machine are a mix of range and constant pressure this pressure is measured in centimeters of water pressure (H2O) and 4-20 cm H20 is average range on most CPAP. Some Machines also deliver 2 cm H2o Minimum pressure.
- 4 - 20 cm H2O
The ramp feature allows the user to start treatment at a lower pressure to fall asleep with gradually raising the pressure over a set time, this is a comfort setting and can set from 0 to 60 minutes on most CPAP machine.
- 5-45 Min.
This feature indicates the maximum altitude at which the CPAP/BiPAP machine will properly operate.
- CPAP
- S
With the help of this features identify which cpap/bipap machine has inbuilt humidifier. Inbuilt humidifier can't be separated from cpap/bipap.
- Yes
This feature identifies how the machine incorporates a heated humidifier. Build in humidifier are built into the CPAP/Bipap machine and cannot be separated from the machine and integrated humidifiers connect directly to the CPAP machine, and they can only be used with compatible CPAP.bipap machines. With integrated humidifier, the device can be separated and used without the humidifier. CPAP/BiPAP machine that do not have a built-in humidifier and do not have an integrated humidifier option have to use a stand-alone humidifier as the machine heated humidifier option. A stand-alone humidifier can be used with any machine and connect to the CPAP/BiPAP with an additional hose.
- Built-In
This feature indicates that the machine has an integrated heated hose option to enhance humidification and reduce rain out. An integrated headed hose receives power directly from the machine and does require a power supply. The tube heat setting is set through the machine menu screen.